PWMC750-LQ-C-1

Application:

This sampler is applied to the sampling of flammable and explosive, toxic and harmful, acidic and alkali corrosion of medium and low pressure liquid at normal temperature, and can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. Samples collected remain at their freshest.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-2

Application:

This sampler is applied to the sampling of liquid in the middle and low pressure, middle and high temperature that needs cooling due to inflammable and explosive, toxic and harmful, acid and alkali corrosion. It can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. The liquid is cooled to about 50℃ by cooler, and the samples collected are not hot and keep the freshest.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-3

Application:

This sampler is suitable for the sampling of flammable and explosive, toxic and harmful, acid and alkali corrosion in the middle and low pressure, but the temperature is low enough to a certain value will solidify or crystallize and need insulation liquid, can be installed in the pump outlet to the pump inlet or the inlet of the valve to the outlet of the control valve process pipeline. The sampling container shall be a closed sampling glass bottle. The sampler box is heated/insulated by steam to about 50℃, the samples collected will not solidify or crystallize, and keep the freshest.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-4

Application:

This sampler is applied to the sampling of flammable and explosive, toxic and harmful, acidic and alkali corrosion of medium and low pressure liquid at normal temperature, and can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. If liquid purity is higher or liquidity is poor, nitrogen can be used to purge the sampling pipeline, and the samples collected are more fresh and accurate.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-5

Application:

This sampler is applied to the sampling of the liquid which needs to be cooled but will solidify or crystallize when the temperature reaches a certain value and needs to be kept warm. It can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. The box body of the sampler is heated/insulated by steam to about 50℃, while the liquid is also cooled to about 50℃ by the cooler. The samples collected are not hot, nor will they solidify or crystallize, so as to keep the freshest.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-6

Application:

This sampler is applied to the sampling of liquid in the middle and low pressure, middle and high temperature that needs cooling due to inflammable and explosive, toxic and harmful, acid and alkali corrosion. It can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. The liquid is cooled to about 50℃ by cooler first, and the samples collected are not hot. If the liquid purity is higher or the liquidity is poor, nitrogen can be used to purge the sampling pipeline, and the samples collected are fresher and more accurate.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-7

Application:

This sampler is applied to the sampling of the liquid which is flammable, explosive, toxic and harmful and has acid and alkali corrosion, but the temperature is low enough to a certain value will be solidified or crystallized and needs insulation. It can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. The box body of the sampler is first heated/insulated by steam to about 50℃, and the samples collected will not solidify or crystallize. If the liquid purity is higher or the fluidity is poor, the sampling pipeline can be swept with nitrogen, and the samples collected will be fresher and more accurate.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange

PWMC750-LQ-C-8

Application:

This sampler is applied to the sampling of the liquid which needs to be cooled but solidifies or crystallizes when the temperature is low enough to a certain value. It can be installed in the process pipeline between the outlet of the pump and the inlet of the pump or between the inlet of the regulating valve and the outlet of the regulating valve. The sampling container shall be a closed sampling glass bottle. The box body of the sampler is first heated/kept warm by steam to about 50℃, while the liquid is also cooled to about 50℃ by cooler. The samples collected will not be hot nor solidified or crystallized. If the liquid purity is higher or the fluidity is poor, the sampling pipeline can be swept with nitrogen, so that the samples collected will be fresher and more accurate.

Process technical index: 

Process pressure:(0.05-10.0)Mpa      

The environment temperature: 200 ℃)

Material:316L/304   

Process connection:flange